Suzuki Outboard Fitment Specification
Suzuki DF140B (2.0L I4) Propeller Slip & Fitment Guide
Dialing in a Suzuki DF140B (2.0L I4) starts with its factory 2.59:1 lower-unit gear ratio and 5,700 – 6,300 RPM wide-open-throttle ceiling. Launch SlipStream below with these exact factory specs pre-loaded to measure your current slip percentage and compare gearcase-matched stainless upgrades.
Gear Ratio
2.59:1
Factory WOT RPM
5,700 – 6,300 RPM
Gearcase & Spline
4.25" · 15-Spline
Diameter Class
13.5"–14"
Typical Pitch Range
17" – 26"
Matched Hub Kit
Solas Rubex RBX-126 (4.25" 15-Spline Suzuki)
Recommended Stainless Prop Architectures for Suzuki DF140B (2.0L I4)
Holeshot, Heavy Load & Bay Cruise (4-Blade)
Turning Point Express Mach4 (4.25") or Solas Rubex HR4 Titan (50–140 HP)
Adds stern lift, reduces slip in turns, and holds plane at lower speeds—drop 1" of pitch when stepping up from a 3-blade wheel.
Top-End Speed & Light Skiff (3-Blade)
Solas Rubex NS3 (4.25") or Turning Point Express Mach3
High-rake 3-blade stainless geometry maximizes bow lift and top-end GPS speed while keeping WOT RPM inside 5,700 – 6,300 RPM.