Suzuki Outboard Fitment Specification
Suzuki DF150AP (2.9L I4) Propeller Slip & Fitment Guide
Dialing in a Suzuki DF150AP (2.9L I4) starts with its factory 2.50:1 lower-unit gear ratio and 5,000 – 6,000 RPM wide-open-throttle ceiling. Launch SlipStream below with these exact factory specs pre-loaded to measure your current slip percentage and compare gearcase-matched stainless upgrades.
Gear Ratio
2.50:1
Factory WOT RPM
5,000 – 6,000 RPM
Gearcase & Spline
4.75" · 15-Spline
Diameter Class
15"–16"
Typical Pitch Range
17" – 26"
Matched Hub Kit
Solas Rubex RBX-104 (4.75" 15-Spline Suzuki)
Recommended Stainless Prop Architectures for Suzuki DF150AP (2.9L I4)
Holeshot, Heavy Load & Bay Cruise (4-Blade)
Solas Rubex L4 (4.75" · 15"–15.25" dia) or Turning Point Express Mach4 (150–300 HP)
Adds stern lift, reduces slip in turns, and holds plane at lower speeds—drop 1" of pitch when stepping up from a 3-blade wheel.
Top-End Speed & Light Skiff (3-Blade)
Solas Rubex S3 (4.75" · 15-1/8" dia) or Solas Rubex L3 / HR3
High-rake 3-blade stainless geometry maximizes bow lift and top-end GPS speed while keeping WOT RPM inside 5,000 – 6,000 RPM.